Physics
Showing 81–96 of 2480 results
-
Magnetism & Electromagnetism, Physics
Adjustable Gap Magnet
Catalogue No: 1070010
Neodymium magnets fitted on two adjustable iron holders on metallic base. One can easily adjust the field strength in between the two magnets by adjusting the top gap between both the magnets.
* Adjustable Gap MagnetPack of (Pcs): 1
SKU: 1070010 -
Optics, Physics
Advanced Spectrometer
Catalogue No: 1111540
Provides better Accuracy +-f measurement. High quality optics ensures sharp spectral images while precision machining and fitting allows for precise rotation and accurate measurement. The turntable is mounted on heavy bearing and both telescope and collimator mounted on pillars made from solid metal blocks for added ruggedness and durability. Streamlined body to avoid crevices around fittings.
Has a heavy, sturdy, stable cast metal base, with scratch resistant epoxy-coating. The instrument is mounted on a baseboard,
which easily slides into a polished hardwood case.
Scale: Main scale about 150mm in diameter is fixed on the turntable that also holds telescope. Scale is precision engraved 0-360degree x 0.5 degree, which is further complimented by a precision engraved, double ended vernier that provides convenient reading with a least count of 30 sec. Rotations of both the scales, main as well as vernier, have fine adjustment screws and release of a clamping screw enables coarse adjustment to be made by hand.
Collimator: Mounted on fixed pillar and fitted with 178mm FL achromatic objective, 32mm clear aperture. A unilaterally adjustable slit, 6mm long is also fitted.
Telescope: Mounted on moveable pillar and fitted with 178mm FL achromatic objective. Also fitted is a 15x Ramsden eyepiece and a crossline graticule.
Both the telescope and collimator have rack and pinion focusing incorporates provision for leveling the axis of collimator and telescope along the axis of rotation.
Prism Table: The table is marked with grooved lines to assist placing the prism with respect to the table leveling screws and has interchangeable clamping units for the prism and a diffraction grating.
Standard Set of Accessories:
* Dense Flint Glass prism 1 No.
* Prism clamp 1 No.
* Diffraction grating holder 1 No.
* Watchmaker’s eyeglass 1 No.
* Tommy bar / L Key for adjusting optical axis of tubes 1 No.
* Polished hardwood case 1 No.
* Advanced SpectrometerPack of (Pcs): 1
SKU: 1111540 -
Electrostatics, Physics
Aepinus Condenser
Catalogue No: 1080280
Useful for exploring the principle of working of apacitance and the relationship between charge, voltage and capacitance. Comprises a pair of adjustable circular metal discs of diameter 100mm attached to the insulated handles and is supported on insulated pillars mounted vertically on a base. Another pillar has a clamp for holding glass dielectric plate between the metal discs. The glass plate may be replaced by plates of other material to study the effect of dielectric on capacitance. Insulating handles of metal disc provided with 4mm sockets.
* Aepinus CondenserPack of (Pcs): 1
SKU: 1080280 -
Mechanics, Physics
Air Blower, Deluxe
Catalogue No: 1031180/4
Specially designed, heavy duty, electrically operated air blower provides continuously variable air velocity control and is ideal for use with the Linear Air Track, Cat. No. 1031180/1. Complete assembly housed in a robust sheet metal case with anti skid rubber feetand fetature very low noise level. The compact size makes it suitable for bench top use. Designed for continuous, uninterrupted use. Supplied complete with flexible hose, hose adapter and detachable mains cable. Operates on 220-240V AC, 50Hz.
* Air Blower, DeluxePack of (Pcs): 1
SKU: 1031180/4 -
Mechanics, Physics
Air Blower, Deluxe
Catalogue No: 1031180/5
Specially designed, heavy duty, electrically operated air blower provides continuously variable air velocity control and is ideal for use with the Linear Air Track, Cat. No. 1031180/1. Complete assembly housed in a robust sheet metal case with anti skid rubber feetand fetature very low noise level. The compact size makes it suitable for bench top use. Designed for continuous, uninterrupted use. Supplied complete with flexible hose, hose adapter and detachable mains cable. Operates on 220-240V AC, 50Hz.
* Hose Pipe for Air BlowerPack of (Pcs): 1
SKU: 1031180/5 -
Physics, Property of Matter Fluids
Air Compression Fire Generator
Catalogue No: 1020890
Illustrate the relation between pressure and temperature. On quickly pushing the plunger inside the tube, air inside the-tube gets compressed igniting a cotton ball. This five gets extinguished immediately as soon as all the oxygen in the tube gets exhausted. Can also be used to illustrate the kindling point of a material. Built of rugged transparent plastic, the chamber comes apart for easy cleaning.
* Air Compression Fire GeneratorPack of (Pcs): 1
SKU: 1020890 -
Physics, Property of Matter Fluids
Air Pressure Cups, 75mm
Catalogue No: 1021370
Two near-hemispherical rubber cups, when held together face to face and squeezed to force out the entrapped air, it becomes surprisingly difficult to pull them apart. Each hemispherical cup is about 75mm in diameter and has two finger handles for holding them and pulling them apart. Also has two release posts for releasing the inside vacuum.
* Air Pressure CupsPack of (Pair): 1
SKU: 1021370 -
Modern Physics, Physics
Alpha Scattering Apparatus
Catalogue No: 1130260
A low cost apparatus for the demonstration of the Rutherford scattering. Comprises a wooden launching ramp about 300 x 50 x 105mm (L x W x H) with a guiding groove running down its curved front face along its length and index marks at 40, 60, 80 & 100mm height above the base that provides 4 pre-determined launching heights. Also included is a spun Aluminum hill about 280mm diameter and 60mm height along with a steel ball. The shape of Aluminum hill has been carefully determined by varying its height above the base line by an amount arrived on the basis of the reciprocal of the radius.
* Alpha Scattering ApparatusPack of (Pcs): 1
SKU: 1130260 -
Electricity & Electrical Circuits, Physics
Ammeter, Multirange, AC/DC
Catalogue No: 1091640
A multirange rectangular ammeter mounted on top of a sturdy plastic box, with ranges selectable through a rotatory knob and AC/DC selection through a toggle switch. AC input through a pair of 4mm shielded sockets and DC output through a pair of 4mm colour-coded shielded sockets. Ranges available are 10mA / 100mA / 500mA / 1A / 2.5A / 5A in both AC and DC.
* Ammeter, Multirange, AC/DCPack of (Pcs): 1
SKU: 1091640 -
Physics, Sensors
Ammonium Sensor with Electrode
Catalogue No: 1160020
Easily measure the ammonium ion (NH ) level of a solution. Use it to 4 study water quality, determine the ammonium level in foodstuffs and more.
* Electrode also sold separately
* Concentration Range 5 uM to 1M or
0.1 ppm to 14,000 ppmPack of (Pcs): 1
SKU: 1160020 -
Magnetism & Electromagnetism, Physics
Ampere Rule Apparatus
Catalogue No: 1070355
L-shaped heavy brass wire with terminals at both ends is mounted on a transparent base. Bent vertical arm of the wire passes through a circular acrylic disc, useful for locating ploting compass. Flow of current produces electromagnetic effect as per Ampere’s Law.
Accessories:
* 38mm Compass x 1pc
* 16mm Compass x 6pcs
* Ampere Rule ApparatusPack of (Set): 1
SKU: 1070355 -
Electronics, Physics
Analogue to Digital Converter
Catalogue No: 1100225
ADC circuit internally fitted inside a plastic box of size 142x80x40mm approx. Input of Analogue signal 0-5V DC through 4mm input sockets is converted into digital output signal. 8 LED’s are used for representation of 8 bit binary digital signal. The output voltage against each LED directly comes out through 4mm sockets and can be used for coupling it with DAC instrument. Operating voltage for the instrument is 220V AC.
* Analogue to Digital ConverterPack of (Pcs): 1
SKU: 1100225 -
Metrology Earth Science & Solar System, Physics
Anemometer
Catalogue No: 1140480
For determination of low wind speeds. This Robinson’s cup Anemometer comprises 4 light weight, hemispherical plastic cups arranged radially on metal spokes attached to a central hub and can rotate freely. Three cups are black and one red to facilitate counting of rotations per wind time. * ANEMOMETER
Pack of (Pcs): 2
SKU: 1140480 -
Metrology Earth Science & Solar System, Physics
Anemometer
Catalogue No: 1140490
This unique design gives a direct reading of wind speed, without the need to count revolution. The low and high calibrations register wind speed in ms-1 and Beaufort scale. It can be held in hand or fixed permanently. Complete with product guide. Size: 28cm x 19cm.
* ANEMOMETERPack of (Pcs): 1
SKU: 1140490 -
Physics, Property of Matter Fluids
Archimedes Principle Kit
Catalogue No: 1020060
A complete self contained kit for exploring the concepts related to buoyancy and Archimedes principle, both qualitatively and quantitatively. It consists:
1. Iron cube, 20mm in size.
2. Beaker 100mL to collect displaced liquid.
3. Newton meter.
4. Displacement vessel, glass, 250mL.
5. Wooden Block* Archimedes Principle Kit
Pack of (Pcs): 1
SKU: 1020060
